Self Test Failures
The OpenSSL library includes a test suite that exercises components from both libcrypto.a and libssl.a. Ensuring the library builds and executes its tests properly is a keystone to using the library.
This page will show you how to isolate the test and the cause under many conditions. The more information you can supply with a bug report or pull request, the easier it is for the team to identify the failure or accept proposed changes. Also see Item 17. I think I've found a bug, what should I do? in the OpenSSL FAQ.
Generally speaking, there are two generations of self tests. The first generation is from OpenSSL 1.0.2 and below. The second generation is from OpenSSL 1.1.0 and above. This page focuses on the second generation, or OpenSSL 1.1.0 and above.
You can sometimes isolate a bug with no-asm, and sometimes with -O0 or -O1. Ideally the bug will be present with no optimizations (-O0), but sometimes it takes some compiler analysis to tickle it (-O1).
OpenSSL 1.1.0
Build the Library
The first thing you should do after verifying the bug is to create a debug build of the OpenSSL library and attempt to reproduce it.
TODO: provide instrcutions.
Build the Test
You typically run make test to validate the library after make'ing.
$ make test
...
make[1]: Entering directory '/home/test_user/openssl-1.1.1d'
make[1]: Leaving directory '/home/test_user/openssl-1.1.1d'
make[1]: Entering directory '/home/test_user/openssl-1.1.1d'
( cd test; \
mkdir -p test-runs; \
SRCTOP=../. \
BLDTOP=../. \
RESULT_D=test-runs \
PERL="/usr/bin/perl" \
EXE_EXT= \
OPENSSL_ENGINES=`cd .././engines 2>/dev/null && pwd` \
OPENSSL_DEBUG_MEMORY=on \
/usr/bin/perl .././test/run_tests.pl )
../test/recipes/01-test_abort.t .................... ok
../test/recipes/01-test_sanity.t ................... ok
...
../test/recipes/15-test_dh.t ....................... ok
../test/recipes/15-test_dsa.t ...................... ok
../test/recipes/15-test_ec.t ....................... Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/5 subtests
../test/recipes/15-test_ecdsa.t .................... Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
../test/recipes/15-test_ecparam.t .................. Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/134 subtests
../test/recipes/15-test_genrsa.t ................... ok
../test/recipes/15-test_mp_rsa.t ................... ok
../test/recipes/15-test_out_option.t ............... ok
../test/recipes/15-test_rsa.t ...................... ok
../test/recipes/15-test_rsapss.t ................... ok
...
Debug the Test
You can run a specific test by setting PERL5LIB and TOP variables as shown below.
# From the root of the OpenSSL directory
$ PERL5LIB=util/perl TOP=$PWD perl test/recipes/15-test_ec.t
1..5
ok 1 - require '/home/test_user/openssl-1.1.1d/test/recipes/tconversion.pl';
# Subtest: /home/test_user/openssl-1.1.1d/test/ectest
1..11
crypto/ec/ecp_nistp521.c:144:15: runtime error: load of misaligned address 0x7ffec57b10b7 for type 'limb', which requires 8 byte alignment
0x7ffec57b10b7: note: pointer points here
c2 31 7e 7e f9 9b 42 6a 85 c1 b3 48 33 de a8 ff a2 27 c1 1d fe 28 59 e7 ef 77 5e 4b a1 ba 3d 4d
^
/home/test_user/openssl-1.1.1d/util/shlib_wrap.sh /home/test_user/openssl-1.1.1d/test/ectest => 1
not ok 2 - running ectest
# Failed test 'running ectest'
# at test/recipes/15-test_ec.t line 23.
# Subtest: ec conversions -- private key
1..10
ok 1 - initializing
...
Debug an Engine
TODO: provide instructions
OpenSSL 1.0.2
The instructions that follow help determine a failue in OpenSSL 1.0.2 and below. As of January 2020, OpenSSL 1.0.2 is end of life. You should move to OpenSSL 1.1.x as soon as possible.
Build the Library
The first thing you should do after verifying the bug is to create a debug build of the OpenSSL library and attempt to reproduce it. Creating a debug build is as easy as using -d configure argument. In the output below, notice -d caused the library to reduce optimizations (-O0) and increase debugging information (-g). However, the debugging information will lack symbolic constants because -g3 was not used:
$ ./config -d Operating system: i86pc-whatever-solaris2 Configuring for solaris64-x86_64-gcc ... CC =gcc CFLAG =-m64 -Wall -DL_ENDIAN -O0 -g -pthread -DFILIO_H -Wa,--noexecstack ...
To ensure most of your preferred flags are used, perform the following. Not all flags will be honored, but its an improvement over -d. The -DNDEBUG is used to ensure Posix's assert does not crash your program while under the debugger.
$ ./config no-asm -DNDEBUG -g3 -O0 -fno-omit-frame-pointer Operating system: i86pc-whatever-solaris2 Configuring for solaris64-x86_64-gcc ... CC =gcc CFLAG =-m64 -Wall -DL_ENDIAN -O3 -pthread -DFILIO_H -g3 -O0 -fno-omit-frame-pointer ...
After configuring, run make as usual.
Build the Test
You typically run make test to validate the library after make'ing. Since you already know there's a problem, you can build the problem test with the following. The command below is an example for tracking down a failure in the HMAC test suite
$ VERBOSE=1 make TESTS="test_hmac" test
...
( cd test; \
SRCTOP=../. \
BLDTOP=../. \
PERL="/usr/local/bin/perl" \
EXE_EXT= \
OPENSSL_ENGINES=.././engines \
/usr/local/bin/perl .././test/run_tests.pl test_hmac )
../test/recipes/05-test_hmac.t ..
1..1
test 0 ok
test 1 ok
test 2 ok
test 3 ok
test 4 ok
test 5 ok
test 6 ok
../util/shlib_wrap.sh ./hmactest => 0
ok 1 - running hmactest
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.06 cusr 0.02 csys = 0.12 CPU)
Result: PASS
`test' is up to date.
Debug the Test
The executable for test_hmac is created from the source 05-test_hmac.t, and it will be located at ./test/buildtest_hmac:
$ file ./test/buildtest_hmac ./test/buildtest_hmac: ELF 64-bit LSB executable AMD64 Version 1, dynamically linked, not stripped
You can manually execute the test with the following. Note that $PWD is the root of the OpenSSL distribution, and the libraries are put on path using LD_LIBRARY_PATH.
$ LD_LIBRARY_PATH=".:$LD_LIBRARY_PATH" test/hmactest ^C $
You can run the test under a debugger with the following. As can be seen, the execution results in a loop between lines 184 and 189.
$ LD_LIBRARY_PATH=".:$LD_LIBRARY_PATH" gdb test/hmactest
GNU gdb (GDB) 7.6
...
Reading symbols from .../openssl/test/hmactest...done.
(gdb) r
Starting program: /export/home/jwalton/openssl/test/hmactest
[Thread debugging using libthread_db enabled]
^C
Program received signal SIGINT, Interrupt.
OPENSSL_cleanse () at crypto/x86_64cpuid.s:184
184 testq $7,%rdi
(gdb) where
#0 OPENSSL_cleanse () at crypto/x86_64cpuid.s:184
#1 0xffff80ffba0eabec in hmac_ctx_cleanup (ctx=0x412ac0)
at crypto/hmac/hmac.c:144
#2 0xffff80ffba0eac6f in HMAC_CTX_reset (ctx=0x412ac0)
at crypto/hmac/hmac.c:160
#3 0xffff80ffba0eab68 in HMAC_CTX_new () at crypto/hmac/hmac.c:129
#4 0xffff80ffba0eae2e in HMAC (evp_md=0xffff80ffba1afec0 <md5_md>,
key=0x412700 <test>, key_len=0,
d=0x412714 <test+20> "More text test vectors to stuff up EBCDIC machines :-)", n=54, md=0xffff80ffba1c8100 <m.9561> "", md_len=0x0)
at crypto/hmac/hmac.c:209
#5 0x0000000000401a65 in main (argc=1, argv=0xffff80ffbffffa28)
at test/hmactest.c:105
(gdb) s
185 jz .Laligned
(gdb)
186 movb %al,(%rdi)
(gdb)
187 leaq -0(%rsi),%rsi
(gdb)
188 leaq 0(%rdi),%rdi
(gdb)
189 jmp .Lot
(gdb)
184 testq $7,%rdi
(gdb)
185 jz .Laligned
(gdb)
186 movb %al,(%rdi)
(gdb)
187 leaq -0(%rsi),%rsi
(gdb)
188 leaq 0(%rdi),%rdi
(gdb)
189 jmp .Lot
Debug an Engine
If you are testing an OpenSSL engine, then the procedures and paths are slightly different.
You manually build the engine with:
$ cd test $ make test/afalgtest
You can run the engine test under a debugger with the following:
$ OPENSSL_ENGINES=../engines/afalg gdb ./afalgtest
