EVP Symmetric Encryption and Decryption

The libcrypto library within OpenSSL provides functions for performing symmetric encryption and decryption operations across a wide range of algorithms and modes. This page walks you through the basics of performing a simple encryption and corresponding decryption operation.

In order to perform encryption/decryption you need to know:

• Your algorithm
• Your mode
• Your key
• Your Initialisation Vector (IV)

This page assumes that you know what all of these things mean. If you don't then please refer to Basics of Encryption.

Setting it up

The code below sets up the program. In this example we are going to take a simple message ("The quick brown fox jumps over the lazy dog"), and then encrypt it using a predefined key and IV. In this example the key and IV have been hard coded in - in a real situation you would never do this! Following encryption we will then decrypt the resulting ciphertext, and (hopefully!) end up with the message we first started with. This program expects two functions to be defined: "encrypt" and "decrypt". We will define those further down the page.

#include <openssl/evp.h>
#include <openssl/err.h>
#include <string.h>

int main(int arc, char *argv[])
{
  /* Set up the key and iv. Do I need to say to not hard code these in a
   * real application? :-)
   */

  /* A 256 bit key */
  unsigned char *key = "01234567890123456789012345678901";

  /* A 128 bit IV */
  unsigned char *iv = "01234567890123456";

  /* Message to be encrypted */
  unsigned char *plaintext =
    "The quick brown fox jumps over the lazy dog";

  /* Buffer for ciphertext. Ensure the buffer is long enough for the
   * ciphertext which may be longer than the plaintext, dependant on the
   * algorithm and mode
   */
  unsigned char ciphertext[128];

  /* Buffer for the decrypted text */
  unsigned char decryptedtext[128];

  int decryptedtext_len, ciphertext_len;

  /* Load the human readable error strings for libcrypto */
  ERR_load_crypto_strings();

  /* Encrypt the plaintext */
  ciphertext_len = encrypt(plaintext, strlen(plaintext), key, iv,
    ciphertext);

  /* Do something useful with the ciphertext here */
  printf("Ciphertext is:\n");
  BIO_dump_fp(stdout, ciphertext, ciphertext_len);

  /* Decrypt the ciphertext */
  decryptedtext_len = decrypt(ciphertext, ciphertext_len, key, iv,
    decryptedtext);

  /* Add a NULL terminator. We are expecting printable text */
  decryptedtext[decryptedtext_len] = '\0';

  /* Show the decrypted text */
  printf("Decrypted text is:\n");
  printf("%s\n", decryptedtext);

  /* Clean up */

  /* Remove error strings */
  ERR_free_strings();

  return 0;
}

The program sets up a 256 bit key and a 128 bit IV. This is appropriate for the 256-bit AES encryption that we going to be doing in CBC mode. Make sure you use the right key and IV length for the cipher you have selected, or it will go horribly wrong!!

We've also set up a buffer for the ciphertext to be placed in. It is important to ensure that this buffer is sufficiently large for the expected ciphertext or you may see a program crash (or potentially introduce a security vulnerability into your code). Note: The ciphertext may be longer than the plaintext (e.g. if padding is being used).

We're also going to need a helper function to handle any errors. This will simply dump any error messages from the OpenSSL error stack to the screen, and then abort the program.

void handleErrors(void)
{
  unsigned long errCode;

  printf("An error occurred\n");
  while(errCode = ERR_get_error())
  {
    char *err = ERR_error_string(errCode, NULL);
    printf("%s\n", err);
  }
  abort();
}

Encrypting the message

So now that we have set up the program we need to define the "encrypt" function. This will take as parameters the plaintext, the length of the plaintext, the key to be used, and the IV. We'll also take in a buffer to put the ciphertext in (which we assume to be long enough), and will return the length of the ciphertext that we have written.

Encrypting consists of the following stages:

• Setting up a context
• Initialising the encryption operation
• Providing plaintext bytes to be encrypted
• Finalising the encryption operation

During initialisation we will provide an EVP_CIPHER object. In this case we are using EVP_aes_256_cbc(), which uses the AES algorithm with a 256-bit key in CBC mode. Refer to EVP#Working with Algorithms and Modes for further details.

int encrypt(unsigned char *plaintext, int plaintext_len, unsigned char *key,
  unsigned char *iv, unsigned char *ciphertext)
{
  EVP_CIPHER_CTX *ctx;

  int len;

  int ciphertext_len;

  /* Create and initialise the context */
  if(!(ctx = EVP_CIPHER_CTX_new())) handleErrors();

  /* Initialise the encryption operation. IMPORTANT - ensure you use a key
   * and IV size appropriate for your cipher
   * In this example we are using 256 bit AES (i.e. a 256 bit key). The
   * IV size for *most* modes is the same as the block size. For AES this
   * is 128 bits */
  if(!EVP_EncryptInit_ex(ctx, EVP_aes_256_cbc(), NULL, key, iv))
    handleErrors();

  /* Provide the message to be encrypted, and obtain the encrypted output.
   * EVP_EncryptUpdate can be called multiple times if necessary
   */
  if(!EVP_EncryptUpdate(ctx, ciphertext, &len, plaintext, plaintext_len))
    handleErrors();
  ciphertext_len = len;

  /* Finalise the encryption. Further ciphertext bytes may be written at
   * this stage.
   */
  if(!EVP_EncryptFinal_ex(ctx, ciphertext + len, &len)) handleErrors();
  ciphertext_len += len;

  return ciphertext_len;
}

Decrypting the Message

Finally we need to define the "decrypt" operation. This is very similar to encryption and consists of the following stages: Encrypting consists of the following stages:

• Setting up a context
• Initialising the decryption operation
• Providing ciphertext bytes to be decrypted
• Finalising the decryption operation

Again through the parameters we will receive the ciphertext to be decrypted, the length of the ciphertext, the key and the IV. We'll also receive a buffer to place the decrypted text into, and return the length of the plaintext we have found.

Note that we have passed the length of the ciphertext. This is required as you cannot use functions such as "strlen" on this data - its binary! Similarly, even though in this example our plaintext really is ASCII text, OpenSSL does not know that. In spite of the name plaintext could be binary data, and therefore no NULL terminator will be put on the end (unless you encrypt the NULL as well of course).

Here is the decrypt function:

int decrypt(unsigned char *ciphertext, int ciphertext_len, unsigned char *key,
  unsigned char *iv, unsigned char *plaintext)
{
  EVP_CIPHER_CTX *ctx;

  int len;

  int plaintext_len;

  /* Create and initialise the context */
  if(!(ctx = EVP_CIPHER_CTX_new())) handleErrors();

  /* Initialise the decryption operation. IMPORTANT - ensure you use a key
   * and IV size appropriate for your cipher
   * In this example we are using 256 bit AES (i.e. a 256 bit key). The
   * IV size for *most* modes is the same as the block size. For AES this
   * is 128 bits */
  if(!EVP_DecryptInit_ex(ctx, EVP_aes_256_cbc(), NULL, key, iv))
    handleErrors();

  /* Provide the message to be decrypted, and obtain the plaintext output.
   * EVP_DecryptUpdate can be called multiple times if necessary
   */
  if(!EVP_DecryptUpdate(ctx, plaintext, &len, ciphertext, ciphertext_len))
    handleErrors();
  plaintext_len = len;

  /* Finalise the decryption. Further plaintext bytes may be written at
   * this stage.
   */
  if(!EVP_DecryptFinal_ex(ctx, plaintext + len, &len)) handleErrors();
  plaintext_len += len;

  return plaintext_len;
}

Output

If all goes well you should end up with output that looks like the following:

Ciphertext is:
0000 - e0 6f 63 a7 11 e8 b7 aa-9f 94 40 10 7d 46 80 a1   .oc.......@.}F..
0010 - 17 99 43 80 ea 31 d2 a2-99 b9 53 02 d4 39 b9 70   ..C..1....S..9.p
0020 - 2c 8e 65 a9 92 36 ec 92-07 04 91 5c f1 a9 8a 44   ,.e..6.....\...D
Decrypted text is:
The quick brown fox jumps over the lazy dog

For further details about symmetric encryption and decryption operations refer to the OpenSSL documentation here.

See also

• EVP
• Libcrypto API